100m 4K HDBaseT Extender with USB – EX-100-H2

The EX-100-H2 uses the powerful HDBaseT 2.0 chipset to send along 4K, USB, PoH and HD audio up to 100m/328ft with a single Cat 6 cable. This extender hosts the perfect combination of features to give you the tools you need to set up your next conference or presentation. With separate audio lanes, you’re free to send audio independently to overlay your presentation.
With data transfers in mind, the EX-100-H2 is equipped with the fastest USB hardware HDBaseT is currently capable of; USB 2.0 and up to 190Mbps, which is everything you need to set up HD webcams, smart whiteboards, transfer data and so much more!

Specifications
AUDIO & VIDEO
Inputs:
Transmitter:
1x HDMI: 19-pin type A
1 x Audio: 3.5mm (1/8in)
TRS Stereo
Receiver:
1 x HDBT: 8-pin RJ45 Female
1 x Audio: 3.5mm (1/8in) TRS Stereo

Outputs:
Transmitter:
1x HDBT: 8-pin RJ-45 Female
1x Audio: 3.5mm (1/8in)
TRS Stereo
Receiver:
1x HDMI: 19-pin type A
1x Audio: 3.5mm (1/8in) TRS Stereo

Output Video Encoding: HDBaseT Class C

Encoding Data Rate: 10.2Gbps

End to End Latency: 10μs (microseconds)

Audio Formats: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos

Video Resolutions (max):
1920x1080p @60Hz 12bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @30Hz 12bit 4:2:2 HDR
3840x2160p @30Hz 8bit 4:4:4 HDR

Supported Standards: DCI | RGB | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 340MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)

HDBaseT: HDMI | HDCP 2.2 | EDID | Line Audio | 1-way PoH (TX powers RX) | Bidirectional RS-232 | CEEC

RS-232: 1x RS-232: 3-pin Phoenix (Transmitter and Receiver)

USB:
1x Type B (host | 4x Type A (device)
Maximum uplink speed: 190Mbps

POWER
Power Supply: 12V DC 2A

Max Power Consumption: 12W