100m 4K60 HDBaseT DSC Receiver with USB – RX-700

Utilizing the best in HDBaseT technology, the RX-700 extends 5-Play functionality to your display device over 100m/328ft of Cat6 cable. Using DSC (display stream compression) the RX-700 can support HDMI video up to 2160p 4:4:4 at 60Hz without any visual loss in quality or latency. With HID’s and data transfer in mind, the RX-700 supports data transmission of USB 2.0 devices like HD webcams, smart whiteboards and flash drives alike.

Specifications
AUDIO & VIDEO
Inputs: 1x HDBT In: 8-pin RJ45

Outputs: 1x HDMI Out: 19-pin Type A Female

Output Video Encoding: HDBaseT Class C | PAM16 Encoding

Encoding Data Rate: 10.2Gbps

End to End Latency: 10μs (micro seconds)

Audio Formats: 2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos

Video Resolution (Max):
1920x1080p @60Hz
2560x1440p @144Hz
3840x2160p @60Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
3840x2160p @60Hz 12bit 4:2:2 HDR

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: HDMI: 600MHz | HDBaseT: 340MHz

COMMUNICATION & CONTROL
HDMI: (v2.0b) TMDS | 600MHz Maximum with DSC (Display Stream Compression)

IR: 1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono

RS-232: 1x RS-232: 3-pin Phoenix

HDCP: Pass-Through, 2.3 Supported

EDID: Pass-Through, RX > TX

USB:
1x Type B (host) | 4x Type A (device)*
USB direction must be set using switch before operation
USB hub compatible | Maximum: 7 devices, 23 endpoints
Maximum uplink speed: 190Mbps
*USB direction must be set using switch before operation

Ethernet: 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over HDBaseT | 100Mbps Supported

Consumer Electronics Control (CEC): One-way display trigger from TX

Auto Low Latency Mode (ALLM): Supported

Variable Refresh Rate (VRR): Supported

POWER
Power Supply: 18V DC 3A

Max Power Consumption: 10W