1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder with Sealoc Protection – NHD-110-RX-S

The NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.

Specifications
AUDIO & VIDEO
Inputs: 1x 8-pin RJ-45 female | 10/100Base-T

Outputs:
1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)

Audio Formats: LPCM/MPEG4 AAC stereo, 48KHz

Video Encoding: Primary Stream – H.264/H.265, configurable up to 30Mbps

Video Resolutions (Max):
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

End to End Latency: High Quality Mode: ~250msLow Latency Mode: ~80ms

Maximum Pixel Clock: 165MHz

COMMUNICATION & CONTROL
HDMI: HDCP 1.4 | EDID | CEC (configurable)

RS-232: 1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN: 1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

IR:
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)

POWER
Power Supply: PoE | 12V 1A DC

Max Power Consumption: 6W (DC Adapter)