4K HDR 4:4:4 60Hz HDBaseT™ Receiver with 2-Way IR and PoH (4K: 35m/115ft) – RXF-300-4K

Consumer HDMI content is now breaking through the once comfortable HDBaseT ‘ceiling’ of 10Gbps, with HFR (High Frame Rate). HDR is here already in the form of Blu-Ray, Satellite & Cable (HLG) and gaming content. The RXV-35-4K is the perfect companion for WyreStorm’s MXV line-up of matrices when distances of under 35 meters are required. This is the perfect solution for the TX-H2X-VLC modular card, found in the H2XC line.

Specifications
AUDIO & VIDEO
Inputs: 1x OM3 In: SFP + Fiber LC Connection

Outputs: 1x HDMI Out: 19-pin type A

Video Encoding: TMDS over fiber

Encoding Data Rate: 10Gbps

Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max):
1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 600MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over OM3

RS-232: 1x RS-232: 3-pin Terminal Block -3.5mm | Bidirectional over OM3

Fiber MultiMode: HDMI | HDCP 2.2 | EDID | Bidirectional IR/RS-232

POWER
Power Supply: 12V DC 0.5A

Max Power Consumption: 3.5W