70m 4K60 HDBaseT Extender – EX-70-H2

Part of the latest generation of WyreStorm 4K extenders for the latest generation of 4K HDR content, the EX-70-H2 features dynamic compression technology to enable high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency.

Specifications
AUDIO & VIDEO
Inputs:
Transmitter: 1x HDMI: 19-pin type A
Receiver: 1x HDBaseT 8-pin RJ-45 female

Outputs:
Transmitter:
1x HDBT: 8-pin RJ-45 Female
1x HDMI Loop: 19-pin type A
Receiver: 1x HDMI: 19-pin type A

Output Video Encoding: HDBaseT™ Class A

Encoding Data Rate: 9.2Gbps

End to End Latency: 10μs (microseconds)

Audio Formats: 2ch PCM | Multichannel up to DTS-X and Dolby Atmos

Video Resolutions (max):
1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards: DCI | RGB | Dolby Vision @ 30Hz | HLG | HDR-10

Maximum Pixel Clock: HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT: HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232

CEC: CEC Pass-through – Requires CEC compatibility between source and display

IR:
1x IR TX: 3.5mm (1/8in) TS Mono
1x IR RX: 3.5mm (1/8in) TRS Stereo

RS-232: 1x RS-232: 3-pin Terminal Block

POWER
Power Supply: 18V DC 1A

PoH: IEEE 802.3af 48V 15.4W Max | 2-way

Max Power Consumption: 4.68W