C3110 Series

The ION C3110 is a media converter module that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments.

Specifications
Data Rate: 1000 Mbps, Layer 1

Switch:
SW1: Remote Fiber Fault Detect
SW2: Pause (symmetric)
SW3: Pause (asymmetric)
SW4: Transparent ink Pass Through (Up=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback

Jumper:
Hardware: Mode of operation is determined by the settings on the 4-position switch
Software: Mode of operation is determined by the most recently saved on-board microprocessor settings

Status LEDs:
LKF (fiber link): On = Fiber Link, blinking activity
PWR (Power): On = Connection to powered backplane
TP LED 1 (Copper Link): On = Link, blinking activity
TP LED2 (Copper Duplex): On = Full-Duplex

Dimensions:
Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]

Power Consumption: 3.6 Watts, 300mA @ 112 VDC

Environment:
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 1 lb. [0.45 kg]

MTBF:
Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 667,500 hours (Bellcore)