C3210 Series

The ION C3210 is a media converter module that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber. The ION C3210 is a manageable device when installed in a managed ION chassis.

Specifications
Data Rate: 10/100/1000 Mbps; Layer 2

Max Frame Size:
10,240 Bytes (jumbo frame support)
1,632 Bytes when linked to an xGFEB10xx-120

Switch:
SW1: TP Auto-Negotiation
SW2: TP Speed
SW3: TP Duplex
SW4: Link Pass Through
SW5: Fiber Duplex
SW6: Unused

Jumper: Hardware/Software mode, Auto-MDI/MDIX

Status LEDs:
PWR (Power): ON = Connection to powered backplane
LACT (Fiber Link): ON=Fiber link, Blinking=activity
UTP Duplex/Link: Orange=half duplex link,
Blinking = half duplex activity, Green = Full duplex link,
Blinking =Full duplex activity,
Off = 10 Mbps operation (or no link),
Orange = 100 Mbps operation, Green = 1000 Mbps operation

Dimensions:
Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]

Power Consumption: 3.6 Watts, 300mA @ 12 VDC

Environment:
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 1 lb. [0.45 kg]

MTBF:
Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 667,500 hours (Bellcore)