L2+ Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch – IGS-5225-4P2S
L2+ Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch
PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Specifications
Copper Ports: 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots:
2 1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6)
Compatible with 100BASE-FX SFP
PoE Injector Port: 4 ports with 802.3at/af PoE injector function with Port-1 to Port-8
Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture: Store-and-Forward
Switch Fabric: 12Gbps/non-blocking
Throughput (packet per second): 8.928Mpps@ 64 bytes packet
Address Table: 8K entries, automatic source address learning and aging
Shared Data Buffer: 4Mbits
Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame: 9Kbytes
Reset Button:
<5 sec: System reboot
>5 sec: Factory default
ESD Protection: 6KV DC
Enclosure: IP40 metal case
Installation: DIN-rail kit and wall-mount kit
Connector:
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
LED Indicator:
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Orange)
LNK/ACT (Green)
Per SFP Interface:
100 LNK/ACT (Orange)
1000 LNK/ACT (Green)
Dimensions (W x D x H): 50 x 87.8 x 135
Weight: 610g
Power Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended)
Power Consumption:
Max. 6.2 watts/26.76BTU (Power on without any connection)
Max. 151.8 watts/520.82BTU (Full loading with PoE function)
Operating Temperature: -40 ~ 75 degrees C
Storage Temperature: -40 ~ 85 degrees C
Humidity: 5 ~ 95% (non-condensing)
