NetworkHD™ 600 Series 4K60 4:4:4 10GbE SDVoE Transceiver – NHD-600-TRX
NetworkHD™ 600 Series 4K60 4:4:4 10GbE SDVoE Transceiver
The NHD-600-TRX is a SDVoE transceiver capable of lossless & latency-free 4K60 over a 10GbE network. The TRX allows you to transmit and receive A/V simultaneous through a single device or be programmed to act as a dedicated TX or RX. 3 x USB HID ports allow extension for keyboard and mouse applications such as a corporate meeting room or an operating center. A cutting-edge architecture provides an efficient, small footprint and support for PoE+.
Specifications
AUDIO & VIDEO
Inputs/Outputs:
1x HDMI 2.0b Input
1x HDMI 2.0b Output
1x 5-pin Balanced Analog Audio
1x 10GbE 8-pin RJ45
Video Encoding/Decoding: SDVoE Pixel Pipeline
Encoding/Decoding Data Rate:
1080p@60Hz 8bit – 3.4Gbps
4K @30Hz 4:4:4 8bit – 6.4Gbps
4K @60Hz 4:4:4 8bit – 8.7Gbps (with light compression)
End to End Latency:
Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps
Video Resolution (Max):
4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit
Supported Standards: RGB | DCI | Rec. 709 | BT.2020
COMMUNICATION & CONTROL
HDMI: HDCP 2.2 | CEC
Ethernet: 1 x 1GbE LAN 8-pin RJ45
RS-232: 1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable
IR:
1 x IR TX 3.5mm TS Mono Jack | API Programmable
1 x IR RX 3.5mm TRS Stereo Jack | API Programmable
USB:
3 x USB 1.1 Type A
1 x USB 1.1 Type B Host
POWER
Power Supply: 12V 2A DC PSU | 802.3at PoE+ compliant
Max Power Consumption: Max: 24w | Average: 10w