100m 4K60 AVX Extender with eARC – EX-100-H2-EARC

Extend 18Gbps A/V signals up to 100 meters with the EX-100-H2-EARC. This extender uses AVX technology, a similar transmission that is found inside our powerful NetworkHD 600 series, to send 4K HDR and Dolby Vision content at 60Hz. Compatible with eARC, you can transmit audio signals such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 signals from a smart TV back to an eARC enabled AVR or soundbar. Flexible control passthrough options including IR, RS-232 and LAN allow you control a display and get devices connected over long distances.

Specifications
AUDIO & VIDEO
Inputs:
Transmitter: 1x HDMI: 19-pin type A
Receiver:
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio

Outputs:
Transmitter:
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio
Receiver: 1x HDMI: 19-pin type A

Output Video Encoding: AVX

Encoding Data Rate: 10.2Gbps

End to End Latency: 10μs (microseconds)

Audio Formats:
HDMI Passthrough: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
eARC: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
S/PDIF: 2ch Analog/PCM | Multichannel: LPCM up to Dolby Digital 5.1

Video Resolutions (max):
1920x1080p @120Hz 12bit
3840x2160p @60H 8bit 4:4:4
3840x2160p @60Hz 12bit 4:2:2 HDR

Supported Standards: DCI | RGB | HDR | HDR10 | Low Latency Dolby Vision up to 60Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 600MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)

AVX: HDMI | HDCP 2.2 | EDID | Audio | 1-way PoC (TX powers RX) | Bidirectional IR/RS-232/Ethernet | CEC

Ethernet: 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over AVX (Transmitter and Receiver)

IR: 1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter and Receiver)

RS-232: 1x RS-232: 3-pin Phoenix (Transmitter and Receiver)

POWER
Power Supply: 12V DC 3A

Max Power Consumption: 24W