35m 4K HDBaseT Receiver with USB – RX-500

The little sibling to the RX-700, the RX-500 also utilizes HDBaseT 2.0 technology extending 4K video, USB 2.0, audio and control point to point up to 35m/115ft. The RX-500 still maintains the ability send HID’s and data back to the transmitter with USB 2.0 compatible devices such as HD webcams, smart white boards and data drives alike. Ideally suited for small meeting spaces and conference rooms, the RX-500 pairs perfectly with WyreStorm’s popular line of Presentation Solutions, such as the SW-130-TX, SW-510-TX, or SW-740-TX to meet all of your presentation needs.

Specifications
AUDIO & VIDEO
Inputs:
1x HDBT In: 8-pin RJ45
4x Type A (Device)
1x RS-232: 3-pin Phoenix

Outputs:
1x HDMI Out: 19-pin Type A Female
2x Audio Out/De-embed: 3.5mm (1/8in) TRS Stereo | 2ch audio over HDBaseT | 1-way from TX

Output Video Encoding: HDBaseT Class C

Encoding Data Rate: 10.2Gbps

End to End Latency: 10μs (micro seconds)

Audio Formats:
HDMI Out: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
Audio Out/De-embed: 2ch Analog/PCM

Video Resolution (Max):
1920x1080p @60Hz 12bit
3840x2160p @60Hz 8bit 4:2:0
3840x2160p @30Hz 10bit HDR 4:2:0

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 297MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)

HDBaseT: HDMI | USB | HDCP 2.2 | EDID | 1-way PoH (RX powers TX) | Bidirectional RS-232 | CEC

RS-232: 1x RS-232: 3-pin Phoenix

USB:
4x Type A (Device)
USB hub compatible | Maximum: 7 devices, 23 endpoints
Maximum uplink speed: 190Mbps

POWER
Power Supply: 12V DC 2A

Max Power Consumption: 8W