NetworkHD™ 500 Series 4K60 4:4:4 JPEG2000 Encoder with Dante Audio – NHD-500-DNT-TX

The NHD-500-DNT-TX is part of the powerful NetworkHD 500 series family of products. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante & AES67 audio output.

Specifications
Audio and Video
Inputs/Outputs:
1x HDMI In
1x 3.5mm TRS Analog In
1x 5-pin Balanced Analog Out
1x Toslink Digital Out

Maximum Pixel Clock: 600Mhz

Max Video Resolutions:
4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards: RGB | BT.2020 | BT.709 | DCI | HDR10 | HDR10+ | HLG | Dolby Vision

Audio Formats:
Passthrough: 2CH PCM up to DTS:X & Dolby Atmos
ARC: 2CH PCM up to Dolby Digital Plus & DTS 5.1
Dante/AES67: 2CH PCM

Output Video Encoding: JPEG 2000

Encoding Data Rate: Max: 850Mbps (configurable)

End to End Latency: 1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION AND CONTROL
HDMI: HDMI 2.0b | HDCP 2.2 | CEC | ARC | EDID

Network:
2x 1GbE RJ45 (Dante & main AV out)
1 x 1Gbps SFP
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

RS-232: 1x 3-Pin Phoenix Connector | 2-way | API Programmable

IR:
1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB: 1x USB 2.0 Type Host (Up to 300Mbps upstream)

Security Protocols: AES 128 | SSH | TLS | HTTPS

POWER
Power Supply: 12V DC 1A | 802.3af PoE Compliant

Power Consumption: Max 15.4 | Average: 8w