NetworkHD™ 400 Series 4K AV over IP JPEG 2000 Encoder – NHD-400-E-TX

The NHD-400-E-TX encoder offers stunning 4K HDR video, multichannel audio support and 4K/2K scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-E-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold seperately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is quick and simple.

Specifications
AUDIO AND VIDEO
Inputs: 1x 19-pin HDMI Type A

Outputs: 1x 8-pin RJ-45

Audio Formats: 2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding: JPEG 2000

Encoding Data Rate: Max: 850Mbps

End to End Latency (Max): 1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max): 3840x2160p @60Hz 8bit 4:2:0

Supported Standards: HDR10 | HLG | BT.2020

Maximum Pixel Clock: 300MHz

COMMUNICATION AND CONTROL
HDMI: HDCP 2.2 | CEC

Ethernet: 1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232: 1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER
Power Supply: 12V DC 1A

PoE: IEEE 802.3af (15.4W at PSE)

Max Power Consumption: 8W (with PSU)