70m 4K HDBaseT Extender – EX-70-G2

Super-compact HDBaseT extender set capable of transmitting 4K UHD video and HD audio formats up to 35m/115ft of Cat5e cable. Also compatible with HDCP2.2 protected content, the EX-70-G2 has powerful bi-directional pass-through of CEC, IR and RS-232. 2-way PoH means device can be powered from either end for flexible installation options.

Specifications
AUDIO & VIDEO
Inputs:
Transmitter: 1x HDMI 19-pin type A
Receiver: 1x HDBaseT 8-pin RJ-45 Female

Outputs:
Transmitter: 1x HDBaseT 8-pin RJ-45 Female
Receiver: 1x HDMI 19-pin type A

Output Video Encoding: HDBaseT Class B

Encoding Data Rate: 9.2Gbps

End to End Latency: 10μs (microseconds)

Audio Formats: 2ch PCM | Multi Channel up to Dolby Atmos® and DTS-X™

Video Resolutions (max):
1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 8bit 4:2:0
4096x2160p @60Hz 8bit 4:2:0

Supported Standards: DCI | RGB

Maximum Pixel Clock: HDMI: 300MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL
HDMI:
HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | CEC Pass-through
DVI/D supported with adapter (not included)

HDBaseT: HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | 2-way PoH | Bidirectional IR

IR:
1x IR TX: 3.5mm (1/8in) TS Mono
1x IR RX: 3.5mm (1/8in) TRS Stereo

RS-232: 1x RS-232: 3-pin Phoenix (v2 chassis only)

POWER
Power Supply: 18V DC 1A

PoH: IEEE 802.3af 15.4W Max | 2-way

Max Power Consumption: Transmitter: 7W | Receiver: 17W