70m 4K HDBaseT™ Scaling Receiver with Downscaling – RX-70-4K-SCL

A vital addition to any HDBaseT distribution system, the RX-70-4K-SCL scales incoming video content to best suit the display device to which it is attached. This allows the best quality video content to be sent throughout the system, avoiding EDID clashes or older display technology compromising the rest of the system.

Specifications
AUDIO & VIDEO
Inputs: 1x HDBaseT In 8-pin RJ-45 female

Outputs:
1x HDMI 19-pin type A
1x S/PDIF Out Coaxial Digital
1x Audio Out 3pin Phoenix Connector

Output Video Encoding: HDBaseT Class A

Encoding Data Rate: 9.2Gbps

End to End Latency: 10μs (micro seconds)

Audio Formats:
S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max):
1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4
Long Cable Mode Forced Resolution on H2X Matrix: 1920x1080p @60Hz 12bit

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 297mHz

COMMUNICATION & CONTROL
HDMI: HDCP 2.2 | EDID (Configurable) | DVI-D supported with adapter (not included)

HDBaseT: HDMI | HDCP 2.2 | EDID (Configurable) | CEC | Bidirectional IR, RS-232, and Ethernet

Ethernet: 2x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | API Receiver Configuration | Bidirectional over HDBaseT

IR: 1x IR TX 3.5mm (1/8in) TS Mono | 1x IR RX 3.5mm (1/8in) TRS Stereo | Transmitted over HDBaseT

RS-232: 1x 3-pin Phoenix Connector | API Receiver Configuration | Bidirectional over HDBaseT when used with H2X matrix

ARC (Audio Return Channel): Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT

POWER
Power Supply: 12V DC 2A

Max Power Consumption: 16.4W